2x .035 (0.889mm) .098 (2.261mm) .193 (4.902mm) as assembled light pipe press fiber optic in device layout for best results use only narrow viewing angle non-diffused leds with recommended pwb light pipe preparation 3 solder in place output power greater than 100mcd. clip onto led and sequence of asssembly 6. 1 2 notes rohs compliant. 1. ul 94v-2 flammability rating. 2. -40 c to 85 c operating temperature. 3. suitable for light pipe with 2.2mm jacket and optical core no greater 4. than 1.5mm. do not wave solder with this device. 5. 5.588mm 5.334mm jacket trimmed fiber optic 3mm led (2.896mm) .114 0.51) .157 (3.988mm) .220 .210 .06.02 (1.52mm .039 (.991mm) .193 (4.902mm) .087 (2.210mm) 10/6/10 200 initials d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 kh 176 dpz 8/10/10 kh 8/3/10 visual communications company, inc. any without the written permission of prohibited. drawn checked title: b edges .030 max reproduction in part or as a whole the information contained in this rev dwg. no. sheet 1 of 1 do not scale drawing size material proprietary and confidential visual communications company, inc is 002 phone (760) 560-1300 fax (760) 560- 1301 emai l vccsales@vcclite.com date description ecn # date finish rev revisions third angle projection visual communications company, inc. 190 bosstick boulevard, suite101 san marcos, ca 92069 usa through-hole led mount break all corners and sharp nylon 6/6 see notes 1 scale: 4:1 2 drawing is the sole property of initial release 001 8/3/10 k.howard ul 94-v2 002 thr 22 approval unless otherwise specified dimensions are in inches: angles decimals 1/2" . x .020 .xx .010 finish .xxx .005 128 revised per ecr 100610kh01 .197 (5.004mm) (7.010mm) .161 (4.089mm) .276 .492 (12.497mm)
|
